Viking X-2 Multi Gym Machine
980,00€ με ΦΠΑ
Out of stock
Ενημέρωση Διαθεσιμότητας
- High Back Pulley Pulley.
- Chest press machine, with double ergonomic handles and the ability to adjust the starting point of the exercise, in 6 levels.
- Back pull-up machine : the same chest machine is easily converted to Rowing Dorsal (rowing with a pillow – against the chest to isolate the lower back) since all that is needed is to adjust the starting point of the handles to one of the back pull-up positions. At the same time, the back of the seat can be adjusted in 3 positions to properly support the chest and relieve the waist while rowing.
- Separate overhead pulley to perform resisted trunk flexion (abdominals) and elbow extension in front of shoulders (long head of triceps).
- Side free pulleys – crossover with which you can do functional training for the upper body since with the large degree of freedom they have and the 6 separate settings, they simulate exercises with free weights and activate more muscle groups cooperatively .
- Machine for quadriceps extensions and biceps curls (the exercise for the biceps is performed from a standing position with 1-1 leg)
- Leg press for effective training of all the muscles of the lower body, including the buttocks.
- Biceps pillow that serves either as a Lary Squat, or to support the back during front neck pull-ups.
- Low pull-up pulley with different attachments to perform a) low rowing b) brachial and femoral biceps curls and trapezoidal pull-ups c) gluteal, adductor-abductor training.
Chest machine that easily switches to high rowing by simultaneously adjusting the position of the chest handles and the back pad. There are 6 different starting points for the handles and 3 for the pad.
Functional pulleys with 6 different settings that achieve a full range of motion at an angle of 180 degrees and allow a variety of functional exercises for the upper body.
Leg press mechanism that is easily interchangeable with the biceps pad. There are 3 different adjustments of the press in height which, in combination with the adjustment of the back cushion in length, allow the ideal exercise position to be obtained.
INDICATIVE EXERCISES
Abs
Back pulls
Chest pressures
Seated Rowing
Shoulder presses
Bicep curls
Leg – buttock presses
Thigh Extensions
Bicep curls
Gluteal extensions
Hijackers
Pec Deck
1-arm chest presses
1-arm shoulder presses
Shoulder presses
Stand up rowing
Standing chest presses
RESISTANCE SYSTEM
The X-2 features 72 kg of built-in weights on 16 10 lb (4.5 kg) laminated plates.
Through the architecture of the pulleys the resistance is distributed with an increased ratio at each different exercise station.
So the weight distribution factor on the chest machine is 1.5, giving the exerciser the feeling of lifting 60 kg with only 40 kg of plates, or 108 kg with the maximum load of 72 kg on plates.
For the pulleys (high, low and functional), the corresponding coefficient is 1.2 and gives us the sensation of 86 kg at maximum load.
Frame 70 X 50 X 1.5 mm.
900 kg strength wire ropes.
HANDS
For a more complete execution of the exercises, the X-2 package is included
1) Long high pulley handle
2) Small low pulley handle
3) Triceps rope.
4) Pericnemius – ankle ligaments
5) Extension chains
6) 2 single fabric handles.
2 YEAR WARRANTY
DIMENSIONS / MACHINE WEIGHT
W / W / H: 195 / 139 / 205 cm
Weight 168.8 kg.
DIMENSIONS / PACKAGING WEIGHT
1st box 193X53X20 cm, 62 kg.
2nd box 172X26X26 cm 28.5 kg
3rd box 97X97X10 cm 15 kg.
4th and 5th (plates) 46X33X19 cm 37 kg
| Ιδιότητα | |
|---|---|
| Βάρη |
